FTTX Demo Tutorial

Fiber network

Devices

Routers, switches, OLTs, splitters and ONUs, each plugged into a port of the device above it.

Who can use it: Super Admin, NOC Admin, Field Technician, Employee Open this page in the app
On this page

What this page is for #

Devices are the equipment of your fiber network: routers, switches, OLTs, splitters and ONUs. Each one is plugged into a port of the device above it; that chain is what the map, the topology and the power calculation are built from.

Devices
Devices (example with sample data)
  1. 1 Type chips filter the list; search by name, code, serial, MAC or IP.
  2. 2 Connected to: the device above and the port used.
  3. 3 Ports used (or customers, for an ONU). “Nothing connected” devices can be filtered.
  4. 4 Add device.
Sample data, not a real network. Tap a number or a line to match them; tap the picture to enlarge.

ONUs and OLTs that are linked to live monitoring also show their live state here (Online with dBm, Reachable…).

A device's page #

A splitter's page
A splitter's page (example with sample data)
  1. 1 Ports: what hangs on each output, with the power expected there. “Disconnect” frees a port.
  2. 2 Connect ONU on a free port adds an ONU right there.
  3. 3 Optical power budget: the launch power of the PON port, each loss on the way, and the power expected at this device.
  4. 4 Path to source: every hop from this device back to the router.
  5. 5 Show on map opens the map at this device.
Sample data, not a real network. Tap a number or a line to match them; tap the picture to enlarge.

Add a device #

Add a device (here: an ONU)
Add a device (here: an ONU) (example with sample data)
  1. 1 Live ONU (ONUs only): search the serial or MAC to link the device to the ONU the OLT reports. Status and power then come live.
  2. 2 Type of device. The rest of the form adapts to it.
  3. 3 Upstream device: what it is plugged into. Only devices with a free port are listed; then choose the port.
Sample data, not a real network. Tap a number or a line to match them; tap the picture to enlarge.

Build the tree from the top

  1. Create the sites first.
  2. Add the router and switch in the POP. For a router you can press Fetch routers from DCM and pick one instead of typing.
  3. Add the OLT: easiest from the monitored OLT's page with Place in fiber network, or pick it in the OLT dropdown of this form. Set its PON launch power (dBm) so expected power can be calculated.
  4. Add each splitter: choose its TJ box as the site, the OLT (or another splitter) as upstream device, the PON port / output it uses, its ratio (1:8, 1:16…), and the cable core that feeds it.
  5. Add the ONUs on the splitter outputs, linked to their live ONU.
Add an ONU for a new customer

Needs: Field Technician

  1. Fastest: in the ONU list, find the ONU and press Place on map. (Or Add device here and search the serial under Live ONU.)
  2. Under Connected to, choose the splitter and the output port.
  3. Leave Site on “No site, has its own position” and set the position on the map: Use my location at the customer's home.
  4. Press Save ONU, then Add customer on its page.
Move an ONU to another splitter port

Needs: NOC Admin

  1. Open the ONU's device page and press Edit.
  2. Change the Upstream device and port, save.
An ONU that no OLT monitors

Skip the Live ONU search and fill the form by hand. You can type a measured Rx power (dBm); the map colours the pin from it.

Good to know #

  • A live ONU or OLT can be linked to one device only.
  • Field Technicians can add and edit ONUs only; the type is fixed for them.
  • Deleting a device does not delete the monitored ONU / OLT, only its place in the fiber network.
  • Each page has a History card: who added or changed the device, and what.

Finished this topic?

Tick it off; the topic list shows what you have read.