FTTX Demo Tutorial

Monitoring

PON ports

Laser bias current, temperature, voltage and Tx power of every PON port: spot ageing or hot modules.

Who can use it: Super Admin, NOC Admin, Field Technician, Employee Open this page in the app
On this page

What this page is for #

Each PON port of an OLT has an optical module with a laser. This page lists the health readings of every port across all OLTs so you can find modules that are ageing or overheating before they fail and take a whole port down.

PON ports
PON ports (example with sample data)
  1. 1 Summary tiles: how many ports have high or elevated bias, are hot or warm. Tap a tile to filter.
  2. 2 Bias filter (and a temperature filter beside it): “Warning or worse” shows only the ports to look at.
  3. 3 Sort: worst first by default.
  4. 4 A port: laser bias with its level, temperature, supply voltage, Tx power, ONUs online / total and when it was read.
Sample data, not a real network. Tap a number or a line to match them; tap the picture to enlarge.

How to read the values #

ColumnMeaningAct when
Laser bias (mA)Current the laser needs to keep its output. It rises as the laser wears out.Elevated ≥ 70 mA: watch it. High ≥ 90 mA: plan a replacement.
TemperatureOf the port's module.Warm ≥ 70 °C, Hot ≥ 80 °C: check cooling and airflow in the rack.
VoltageSupply of the module, normally about 3.3 V.Far from 3.3 V.
Tx (dBm)Light the port sends towards the ONUs.It drops compared with the other ports.

Common tasks #

List the ports that need attention
  1. Set Bias to Warning or worse (or tap the “High bias” tile).
  2. Keep the sort on Worst first.
  3. Tap an OLT name to open it and see which ONUs depend on that port.
Check one OLT only
  1. Choose the OLT in the All OLTs filter.
  2. Or open the OLT page: each port card shows the same mA / °C / Tx chips.

Finished this topic?

Tick it off; the topic list shows what you have read.