Monitoring
ONU page
One ONU in depth: live power, temperature, 7-day charts, availability, outages and its customers.
What this page is for #
One ONU in depth: how it is right now, and how it behaved over the last 7 days. Use it to answer “is this line stable?” and “when and why did it drop?”. Open it by tapping an ONU's serial number in any list.
- 1 Signal now: ONU Rx with its band, plus Tx and OLT Rx.
- 2 Temperature of the ONU, supply voltage and laser bias (where reported).
- 3 Read live asks the OLT for this ONU’s values right now.
- 4 On map / Add customer: place the ONU in the fiber network, or link a customer to it.
- 5 Facts: distance from the OLT, online for how long, last down reason, model, last sync.
- 6 Last 7 days in four numbers: availability, outages, average signal, and “swing” (how much the signal moves).
The 7-day numbers #
| Tile | Meaning | Good sign |
|---|---|---|
| Availability | Share of the time the ONU was online. | Close to 100 %. |
| Outages | How often it dropped, total time down and the longest drop. | 0. |
| Average ONU Rx | Typical signal over the week. | In the green band. |
| Swing | Difference between the weakest and strongest reading. | Small (under about 2 dB). A large swing points to a loose connector or a bent fiber. |
| Day vs night | Average signal 06–18 h against the night. | Nearly equal. A big difference often means heat or sunlight on a joint. |
The charts #
- 1 Which reading: ONU Rx, OLT Rx or ONU Tx.
- 2 7 days shows hourly averages; By day shows every reading of one day.
- 3 The line is the hourly average; the light band around it is the lowest–highest in that hour. Gaps are times without a reading (ONU down).
- 4 Up / down strip: green online, amber partly down, red down.
Below it, By hour of day shows whether the signal is weaker at certain hours, and Day × hour colours each hour blue (stronger than usual) or red (weaker). Hover or tap a cell for its value.
- 1 One bar per day: green = online all day, amber = part of the day, red = down all day, grey = no data. Daily availability is kept for 30 days.
Outages, identity and customers #
- 1 Outages with their reason (LOS, dying gasp…), start, end and length.
- 2 Identity: serial, ONU MAC, model, description and the router MAC(s) seen behind the ONU.
- 3 Customer(s) linked to this ONU with package and account details.
- 4 On map / Add customer again, close to where you need them.
If the app finds a customer whose router MAC matches this ONU but who is not linked yet, it shows “Matched by router MAC — not linked yet” with a Link button.
Common tasks #
Is the problem the fiber or the power?
- Look at the status and the Last down fact, then at Outages.
- LOS / “Individual Fiber / Optical Loss”: the light is gone. Check the drop cable and connectors. If many ONUs of the same PON port dropped together, check the feeder.
- Dying gasp / “Power Off”: the ONU lost electricity. Ask the customer to check the adapter and socket.
Check a line after a repair
Needs: Field Technician
- Press Read live.
- Compare the new ONU Rx with the average of the week: it should be the same or better, and in the green band.
Link a customer to this ONU
Needs: Field Technician
- Press Add customer.
- On the customer form, fetch the account from DCM by the MAC of this ONU, or type the details.
- Save. The customer now shows on this page and in the ONU lists.
Related topics
Finished this topic?
Tick it off; the topic list shows what you have read.