FTTX Demo Tutorial

Monitoring

ONU list

Search any ONU by serial, MAC or customer. Filter by status, power or temperature, refresh one live.

Who can use it: Super Admin, NOC Admin, Field Technician, Employee Open this page in the app
On this page

What this page is for #

Every ONU of every OLT in one list. This is where you go when a customer calls: search the serial number, the MAC or the customer's name and see at once whether the line is up and how strong the signal is.

ONU list
ONU list (example with sample data)
  1. 1 Search by serial number, MAC address (any notation), customer name, user ID or phone.
  2. 2 Filters: status, power band, temperature, ownership, OLT, shared ONUs, on the map or not.
  3. 3 Sort: recently synced, weakest signal first, shared first…
  4. 4 Serial number opens the ONU’s page. Below it: router MAC (“Shared +2” = more routers), model and ONU MAC.
  5. 5 Customer linked to this ONU, with user ID, manager / POP and package.
  6. 6 Power: ↓ ONU Rx / ↑ ONU Tx · OLT Rx, coloured by band, and the ONU temperature.
  7. 7 Refresh reads this ONU live from the OLT.
  8. 8 Place on map adds the ONU to the fiber network.
  9. 9 Inactive ONUs lists ONUs that have been down for days.
Sample data, not a real network. Tap a number or a line to match them; tap the picture to enlarge.
ONU list on a phone
ONU list on a phone (example with sample data)
Sample data, not a real network. tap the picture to enlarge.

Common tasks #

A customer calls: check their line
  1. Type the ONU serial, the router MAC or the customer's name / user ID in the search box.
  2. Look at Status: Online, LOS (fiber problem), Dying gasp (power problem) or Offline.
  3. Look at the power: green is fine, amber is weak, red is too weak.
  4. Press Refresh to read the ONU again right now, for example after the customer restarted it.
  5. Tap the serial to open the ONU page with the last 7 days.
List the weakest lines of one OLT
  1. Choose the OLT in All OLTs.
  2. Set All power to Weak power or Critical power.
  3. Sort by Weakest signal first.
Find ONUs that serve several customers
  1. Set All ONUs to Shared ONUs (2+ MACs).
  2. In the Customer column, tap +N more customers to see them all.
  3. Each customer shows the name, DCM ID, contact number (tap it on a phone to call) and address.
Put an ONU on the map

Needs: Field Technician

  1. Find the ONU and press Place on map.
  2. The ONU form opens with the live ONU already linked.
  3. Choose the splitter (or OLT port) it hangs on and set its position: Use my location when you stand at the customer's.
  4. Save. The ONU now shows on the map with its live signal colour.
Find ONUs that are too hot
  1. Set Any temperature to Warm or hot ONUs.

Good to know #

  • The list shows what the last sync read. Refresh on a row gives you the value of this moment.
  • “—” in the power column means the ONU is down or the OLT gave no value. Some OLT models never report OLT Rx.
  • “No customer” means no customer account is linked to this ONU yet. See Customers.
  • If your account is limited to part of the network, you only see the ONUs of your OLTs / PON ports.

Finished this topic?

Tick it off; the topic list shows what you have read.