Fiber network
Network map
Sites, cables, ONUs and customers on a map, coloured by live signal. Search, trace a fiber path, add items.
Who can use it:
Super Admin, NOC Admin, Field Technician, Employee
Open this page in the app
What this page is for #
Your whole network on a map: POPs, TJ boxes, cables, ONUs and customers. ONU pins take the colour of their live signal, so a weak or dead area is visible at a glance. Tap anything to see its details, or trace the fiber path back to the POP.
- 1 Search sites, ONUs, customers, cables or a place name. You can also paste “lat, lng” or a Google Maps link.
- 2 Layers: tap a chip to hide or show POPs, TJ boxes, ONUs, customers or cables.
- 3 ONU power legend: green good, orange weak, red critical, grey no reading. A dashed ring = the power the app expects where there is no reading yet.
- 4 Street / Satellite background. Below: “my location” and “move pins”.
- 5 Add a POP, TJ box, ONU, customer or cable right on the map.
- 6 A POP (navy square). Orange circles are TJ boxes, blue lines are cables.
Tap a pin: the details panel #
- 1 Live readings from the OLT: status, ONU Rx, OLT Rx, Tx, distance.
- 2 Expected power worked out from the splitters and cables, and how the real reading compares (“as planned” or how many dB worse).
- 3 Trace to source draws the fiber path from this ONU through every splitter back to the OLT.
- 4 Shortcuts: open the live ONU or its OLT, add a customer.
The panel also lists the customers on the ONU with their User ID, and the OLT / PON port the ONU was seen on. On a phone the panel slides up from the bottom.
Common tasks #
Find a customer or ONU on the map
- Type the name, user ID, serial or MAC in Search.
- Tap the result. The map moves there and opens the details.
See which fiber a customer is on
- Tap the customer or their ONU.
- Press Trace to source. An animated line shows the path; the panel lists every hop: splitter and output, cable and core colour, PON port, OLT.
- Press Clear path when done.
Add something at a spot on the map
Needs: NOC Admin · Field Technician (ONUs)
- Press Add and choose POP, TJ box, ONU, Customer or Fiber cable.
- Tap the map where it goes.
- The form opens with that position filled in. Complete it and save.
Move a pin that is in the wrong place
Needs: NOC Admin
- Press the move button (four arrows) at the top right.
- Drag the pin to the right place. It saves when you drop it.
- Press Done.
Enter a power reading for an ONU no OLT monitors
Needs: NOC Admin
- Tap the ONU. If it has no live link, the panel shows Current optical power (manual reading).
- Type the dBm value you measured and save. The pin takes that colour and the time is kept.
Good to know #
- The map opens where you last looked; that is remembered per user.
- A pulsing red pin is an ONU in LOS or a device marked faulty. A dashed white pin is planned, not built yet.
- Dashed orange cables are routes waiting for review.
- Only ONUs that were placed appear here. Use Place on map in the ONU list.
- The map needs an internet connection for its background tiles.
Related topics
Devices
Routers, switches, OLTs, splitters and ONUs, each plugged into a port of the device above it.
Fiber cables
Draw cable routes, record them by walking with GPS, track used cores and review field submissions.
Sites (POP & TJ box)
The places your network lives in: POPs with active equipment and TJ boxes where fibers are joined.
Loss standards & expected power
How the app works out the power every splitter and ONU should receive, and the loss values behind it.
Finished this topic?
Tick it off; the topic list shows what you have read.